BGNing 2212 2200kv Brushless Motor Outrunner W/Mount 6t + 30a ESC Controller for Drone Rc Quadcopter Multi Copter UFO

A 2212 A2212 2200KV Brushless Outrunner Motor W/ Mount KV: 2200 Max Efficiency: 80% Max Efficiency Current: 4-10A (>75%) Current Capacity: 12A/60s No Load Current @ 10V: 0.5A No. Of Cells: 2-3S Li-Poly 11.1VMotor Dimensions: 27.5 x 30mm Shaft Diameter: 3.17mm DT-30A Brushless ESC ATTENTION: This ESC do not have the English instruction. Before producing, the manufacturer have set up the program, the ESC do not need additional program. The ESC need to be calibrated before you use Here is the calibration steps:Turn on the remote control, adjust the throttle to the highest, power on, turn off the power after hearing the slow beep. Power on again, after the two drops are heard, the throttle is adjusted to the lowest level. After hearing the long beep, turn off the power, turn off the remote control, the ESC calibration is completed. Pls note:Do not install propellers when you calibrate ESC, otherwise it is dangerous.

• 212 2200kv Brushless Motor
• DT-30A Brushless ESC
• KV: 2200
• Max Efficiency: 80%
• Motor Dimensions: 27.5 x 30mm