Trunking Solid 1000g Magnetic Coil Winding 0.04mm to 1.2mm QA-1-155 High Temper Wire Enameled Copper Wire Connector Loom (Color : 0.13mm, Size : Copper no Spindle)

1000g 0.04 0.05 0.06 0.08 0.1 0.15 0.2 0.25 0.31 1.0 1.2 mm Qa-1-155 Wire Enameled Copper Wire Magnetic Coil Winding High temper 1kgQa-1 is equivalent to 2uew, and its insulating layer is polyurethane, which has good direct weldability at 360 ~ 400 .Main characteristics: it has good direct welding performance, can avoid peeling the film during winding process, and effectively improve the working efficiency; The dielectric loss angle tangent is small, and has good "Q" value characteristics under high frequency; No pinhole in stretching and bending, suitable for high-speed winding; It has good solvent resistance characteristics for solvents and hardeners used in general containing water.Application: widely used in high frequency transformer, inductance coil, relay, motor, electrical instrument coil winding with long-term working temperature below 155 .Common sense: The diameter referred to in the specifications of the enameled wire refers to the diameter of the bare copper wire, excluding the thickness of the insulating varnish. The diameter of the enameled wire measured with a caliper is the outer diameter including the thickness of the insulating paint, and the measured size is usually larger than the size of the standard specification.The product in this link is a copper wire, and the spool is included. There are different colors and sizes of spools. Please know that copper wires of 1.3mm and above specifications are relatively thick and cannot be straightened after being wound.Q in qa-1 is the series code, the first pinyin letter of paint.A is polyurethane paint, the first pinyin letter of amine.-1 stands for thin film. (- 2 for thick film, - 3 for thick film)

• Main characteristics: it has good direct welding performance, can avoid peeling the film during winding process, and effectively improve the working efficiency;
• No pinhole in stretching and bending, suitable for high-speed winding;
• It has good solvent resistance characteristics for solvents and hardeners used in general containing water.
• Specification features high conductivity, low resistance , easy to welding, connect,cut and Separate.
• Please turn off the power before installation，Suitable for use in dry conditions, domestic, commercial, indoor and outdoor.